GSE Temperature and Negative Pressure Controller - Analog Controller
€122,00
Taxes included.
Shipping calculated at checkout.
Details
GSE temperature and negative pressure controller
The GSE Temperature and Negative Pressure Controller regulates the intake and exhaust air speed based on the desired room temperature; it is also equipped with two power sockets dedicated to the exhaust and intake fans respectively. The GSE controller maintains a constant room temperature while simultaneously ensuring that the room remains under negative pressure, which allows all air to be extracted and prevents any odors from escaping. It is simple to use; to set the desired temperature and negative pressure (expressed as a percentage of the difference between exhaust and intake power), simply adjust two knobs. The third knob regulates the minimum exhaust speed when the temperature is below the desired level. The FAN1 input regulates the exhaust fan, while FAN2 regulates the intake fan. If air enters naturally, the fan controller can also be set to operate only the exhaust fan.GSE controller features
- This device is supplied ready for use and requires no wiring.
- Fans are connected via Schuko sockets.
- The temperature sensor operates at low voltage, making it perfect for highly humid environments. The sensor cable is four meters long and can be extended up to 50 meters if necessary.
GSE controller technical data
- Packaging: 160x100x90mm
- Fan controller: 130x80x70mm
- Maximum load: 2x600W / TRIAC 2x16A
- Voltage: 230V 50Hz
- Digital sensor: 5V
- Temperature measurement range: -55°C to +125°C (-67°F to +257°F)
- Accuracy: 0.5°C from -10°C to +85°C
- Protection class: IP54